Mechanical Engineering
About Department
About Department
Department of Mechanical Engineering
The Department of Mechanical Engineering was established in 2005 and currently offers 120 seats in the Undergraduate (UG) programme and 18 seats in the Postgraduate (PG) programme in CAD/CAM. The Department is one of the reputed departments of the institution, distinguished by its qualified faculty, state-of-the-art infrastructure, student achievements, and diverse academic, research, and technical activities. Over the years, the Department has maintained a strong and consistent academic record, with several students securing University-level top ranks.
The M.Tech. programme in CAD/CAM was introduced in 2013 with an initial intake of 18 students. The programme is designed to provide advanced knowledge and skills in core areas of Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM), advanced modelling and simulation, computational methods, emerging manufacturing technologies, research methodologies, and application-oriented problem solving. It caters to engineering graduates, practising engineers, and aspiring researchers seeking advanced expertise in CAD/CAM, product design, manufacturing, automation, and related engineering applications.
The B.Tech. programme in Mechanical Engineering was accredited by the National Board of Accreditation (NBA) on two successive occasions, in 2014 and 2017. These accreditations demonstrate the department’s commitment to outcome-based education, academic quality, continuous improvement, and adherence to professional standards in Mechanical Engineering education.
The department aims to develop graduates with strong expertise in mechanical engineering fundamentals, engineering design, manufacturing processes, thermal and fluid sciences, CAD/CAM, automation, mechatronics, and emerging technologies. Students are provided exposure to engineering software and tools such as AutoCAD, SolidWorks, ANSYS, MATLAB, and other computer-aided design and analysis tools, along with emerging areas such as Industry 4.0, Artificial Intelligence, Internet of Things (IoT), additive manufacturing, robotics, renewable energy, and sustainable engineering relevant to industry and research.
The Department of Mechanical Engineering has established Centres of Excellence and industry-supported initiatives in emerging and niche technological areas through collaborations with reputed organizations such as APSSDC, RoboCouplers, MSME, and other industry partners.
These institutional collaborations strengthen industry–academia interaction and facilitate the continuous enhancement of academic and professional competencies. They provide students and faculty with opportunities for exposure to contemporary technologies and industrial practices through hands-on training, skill development programmes, certifications, internships, industry-oriented projects, and real-world engineering problem-solving activities. Such initiatives contribute to enhancing employability, promoting innovation, and aligning the department’s academic practices with evolving industry and societal needs.
The Department supports students through placement training, competitive examination guidance, mock tests, workshops, seminars, technical programmes, and personality development activities. To encourage professional growth, innovation, creativity, and hands-on learning, the Department promotes active participation in professional bodies and technical clubs.
- ISTE
- ASME
- Mechamorphis Club
- Innovation Club
- Drone Club
With a strong commitment to academic excellence, research, innovation, MoU-based industry collaboration, professional development, industry readiness, and societal responsibility, the Department strives to nurture competent, skilled, ethical, and future-ready Mechanical Engineers capable of contributing effectively to industry, academia, and society.
The Department of Mechanical Engineering follows a student-centric and experiential learning approach through classroom teaching, seminars, MOOCs, NPTEL/SWAYAM courses, internships, project-based learning, technical activities, hackathons, and industry-oriented training. These initiatives develop students’ technical competencies, problem-solving abilities, communication skills, teamwork, innovation, and lifelong learning capabilities.
Research Centre and Research Guidance
The Department of Mechanical Engineering has been recognized by Jawaharlal Nehru Technological University–Gurajada Vizianagaram (JNTU-GV) as a Research Centre for the academic years 2023–24, 2024–25, 2026–27, and 2027–28. This recognition reflects the department’s commitment to strengthening research, innovation, and advanced learning in Mechanical Engineering and emerging areas.
The department has a strong research-oriented faculty base. All eligible faculty members holding Ph.D. qualifications have been recognized as research guides by JNTU-GV, in accordance with the applicable university norms. The recognized research guides have been allocated research scholars and are actively engaged in guiding doctoral research in their respective areas of specialization.
The Research Centre provides a structured platform for faculty and research scholars to undertake advanced and interdisciplinary research, publish research outcomes, pursue funded projects, develop intellectual property, undertake consultancy and collaborative research, and address industrial and societal challenges through innovative engineering solutions.
The department promotes a strong research culture through faculty research, doctoral research, student projects, publications, workshops, seminars, industry collaborations, and innovation-oriented activities.
Student Associations, Clubs and Professional Chapters
The Department of Mechanical Engineering encourages active student participation through professional societies, student associations, and technical clubs that promote technical knowledge, professional development, innovation, teamwork, and career readiness.
The department organizes seminars, technical quizzes, industrial visits, paper and poster presentations, guest lectures, workshops, project exhibitions, technical competitions, and career guidance programmes.
The department facilitates student participation through professional chapters and technical clubs, including:
- Indian Society for Technical Education (ISTE) Students Chapter
- American Society of Mechanical Engineers (ASME) Student Section
- Innovation Club
- Drone Club
These professional chapters and student clubs provide platforms for students to pursue technical interests, collaborate with peers, develop practical and professional competencies, and participate in workshops, technical competitions, project-based activities, innovation initiatives, and industry-oriented programmes. These activities contribute to the development of creativity, problem-solving skills, entrepreneurship, teamwork, leadership, and industry readiness.
Head of Department
Dr.S.Hidayatulla Shariff
Associate Professor & HoD
Dr. S. Hidayatulla Shariff is an Associate Professor and Head of the Department of Mechanical Engineering at Avanthi Institute of Engineering and Technology and also serves as Associate Dean – Research & Development. He holds a Ph.D. in Mechanical Engineering from GITAM University and an M.Tech. in Thermal Engineering from IIT Madras. He has also completed a QIP-PG Certificate Program in Drone Technology from IIITDM Kurnool.
He has over a decade of academic and professional experience and has contributed 23 research publications, 5 published patents, and 3 books. His research interests include biofuels, biodiesel and nano-fuels, internal combustion engines, nanomaterials, engine performance and emissions, vibration and noise analysis, sustainable energy systems, renewable energy, and advanced materials. He is an ASME Professional Member and actively contributes to research, innovation, NBA accreditation, academic administration, and student development activities.
Technical Competencies
- 23 Research Publications, including Scopus-indexed publications
- 5 Published Patents
- 3 Authored Books
- 2 NPTEL Certifications
- 43 FDP/Training/Workshop/Seminar/Webinar/Quiz Activities
- 8+ FDPs/Workshops/Webinars/Seminars Coordinated or Advised
- 4 International/National Journal Peer-Review Contributions
- 2 Research Conference Presentations
- Ph.D. in Mechanical Engineering – GITAM University
- M.Tech. in Thermal Engineering – IIT Madras
- QIP-PG Certification in Drone Technology – IIITDM Kurnool
- Associate Dean – Research & Development
- Convener – Institution’s Innovation Council (IIC)
- Research expertise in Biofuels, Nanomaterials, IC Engines, Sustainable Energy, FEA, Vibration & Noise Control, and Drone Technology
- Professional Member – American Society of Mechanical Engineers (ASME)
- Member – Innovation and Professional Technical Associations
Vision & Mission
Vision
To be a recognized center for quality education and applied research in Mechanical Engineering, producing skilled professionals with an innovation mindset and ethical values.
Mission
M1
To impart strong foundational and advanced knowledge in Mechanical Engineering through effective and learner-centric teaching–learning practices.
M2
To develop analytical, design, and problem-solving abilities by providing hands-on laboratory experience, project-based learning, and industry exposure.
M3
To foster innovation, research aptitude, and the effective use of modern engineering tools to address real-world engineering challenges.
M4
To inculcate professional ethics, teamwork, leadership qualities, and concern for sustainable development and societal needs.
PEOs, POs & COs (UG)
Program Educational Objectives (PEOs)
Our graduates are expected to achieve the following educational objectives.
Graduates will establish successful careers in mechanical engineering and allied industries or pursue higher studies and research.
Graduates will apply fundamental and advanced mechanical engineering principles to analyze, design, and solve complex engineering problems.
Graduates will demonstrate proficiency in modern engineering tools, effective communication, teamwork, and project management skills.
Graduates will exhibit professional ethics, leadership qualities, social responsibility, and commitment to lifelong learning.
Programme Outcomes (POs)
Program : B.Tech | Graduates of the programme will attain the following outcomes.
Engineering Knowledge
Apply knowledge of mathematics, natural science, computing, engineering fundamentals and an engineering specialization as specified in WK1 to WK4 respectively to develop to the solution of complex engineering problems.
Problem Analysis
Identify, formulate, review research literature and analyze complex engineering problems reaching substantiated conclusions with consideration for sustainable development. (WK1 to WK4).
Design/Development of Solutions
Design creative solutions for complex engineering problems and design/develop systems/components/processes to meet identified needs with consideration for the public health and safety, whole-life cost, net zero carbon, culture, society and environment as required. (WK5)
Conduct Investigations of Complex Problems
Conduct investigations of complex engineering problems using research-based knowledge including design of experiments, modelling, analysis & interpretation of data to provide valid conclusions. (WK8).
Engineering Tool Usage
Create, select and apply appropriate techniques, resources and modern engineering & IT tools, including prediction and modelling recognizing their limitations to solve complex engineering problems. (WK2 and WK6)
The Engineer and The World
Analyze and evaluate societal and environmental aspects while solving complex engineering problems for its impact on sustainability with reference to economy, health, safety, legal framework, culture and environment. (WK1, WK5, and WK7).
Ethics
Apply ethical principles and commit to professional ethics, human values, diversity and inclusion; adhere to national & international laws. (WK9)
Individual and Collaborative Team work
Function effectively as an individual, and as a member or leader in diverse/multi-disciplinary teams.
Communication
Communicate effectively and inclusively within the engineering.
Project Management and Finance
Apply knowledge and understanding of engineering management principles and economic decision-making and apply these to one's own work, as a member and leader in a team, and to manage projects and in multidisciplinary environments.
Life-Long Learning
Recognize the need for, and have the preparation and ability for i) independent and life-long learning ii) adaptability to new and emerging technologies and iii) critical thinking in the broadest context of technological change. (WK8)
Knowledge Profile (WK1 to WK9)
Knowledge profile definitions supporting the B.Tech Programme Outcomes.
Natural Sciences
A systematic, theory-based understanding of the natural sciences applicable to the discipline and awareness of relevant social sciences.
Mathematics and Computing
Conceptually-based mathematics, numerical analysis, data analysis, statistics and formal aspects of computer and information science to support detailed analysis and modelling applicable to the discipline.
Engineering Fundamentals
A systematic, theory-based formulation of engineering fundamentals required in the engineering discipline.
Engineering Specialist Knowledge
Engineering specialist knowledge that provides theoretical frameworks and bodies of knowledge for the accepted practice areas in the engineering discipline; much is at the forefront of the discipline.
Engineering Design and Operations
Knowledge, including efficient resource use, environmental impacts, whole-life cost, reuse of resources, net zero carbon, and similar concepts, that supports engineering design and operations in a practice area.
Engineering Practice
Knowledge of engineering practice (technology) in the practice areas in the engineering discipline.
Engineering and Society
Knowledge of the role of engineering in society and identified issues in engineering practice in the discipline, such as the professional responsibility of an engineer to public safety and sustainable development.
Research and Critical Thinking
Engagement with selected knowledge in the current research literature of the discipline, awareness of the power of critical thinking and creative approaches to evaluate emerging issues.
Ethics, Inclusion and Professional Conduct
Ethics, inclusive behavior and conduct. Knowledge of professional ethics, responsibilities, and norms of engineering practice. Awareness of the need for diversity by reason of ethnicity, gender, age, physical ability etc. with mutual understanding and respect, and of inclusive attitudes.
Program Specific Outcomes (PSOs)
Students graduating from the program will be able to achieve the following program specific outcomes.
Ability to design, analyze, and optimize mechanical components and systems using modern CAD/CAM and engineering analysis tools.
Ability to apply principles of manufacturing, thermal, and fluid engineering to develop efficient, sustainable, and practical engineering solutions.
Course Outcomes (COs)
Select the regulation to view the Course Outcomes document.
PEOs, POs, PSOs & COs (PG)
Program Educational Objectives (PEOs)
Our graduates are expected to achieve the following educational objectives.
Excel in career with professional knowledge and skills in the specialized area of Computer Aided Design and Manufacturing.
Demonstrate problem solving skills in industry, society in a broader perspective and be successful in teaching and research.
Programme Outcomes (POs)
Program : M.Tech | Graduates of the programme will attain the following outcomes.
Engineering Knowledge
Apply knowledge of mathematics, natural science, computing, engineering fundamentals and an engineering specialization as specified in WK1 to WK4 respectively to develop to the solution of complex engineering problems.
Problem Analysis
Identify, formulate, review research literature and analyze complex engineering problems reaching substantiated conclusions with consideration for sustainable development. (WK1 to WK4).
Design/Development of Solutions
Design creative solutions for complex engineering problems and design/develop systems/components/processes to meet identified needs with consideration for the public health and safety, whole-life cost, net zero carbon, culture, society and environment as required. (WK5)
Conduct Investigations of Complex Problems
Conduct investigations of complex engineering problems using research-based knowledge including design of experiments, modelling, analysis & interpretation of data to provide valid conclusions. (WK8).
Engineering Tool Usage
Create, select and apply appropriate techniques, resources and modern engineering & IT tools, including prediction and modelling recognizing their limitations to solve complex engineering problems. (WK2 and WK6)
The Engineer and The World
Analyze and evaluate societal and environmental aspects while solving complex engineering problems for its impact on sustainability with reference to economy, health, safety, legal framework, culture and environment. (WK1, WK5, and WK7)
Program Specific Outcomes (PSOs)
Students graduating from the programme will be able to achieve the following program specific outcomes.
Create and deploy new ideas on mechanical systems with optimal design, analysis and evolution in using modern CAD Tools.
Solve criticaltechnical problems in core areas with the use of latest CAM Tools and Technologies.
Course Outcomes (COs)
Select the regulation to view the PG Course Outcomes.
Faculty Members
Academic Information
Syllabus
Academic Calendars
Time Tables
Clubs and Professional Society bodies
Indian Society for Technical Education (ISTE) Students Chapter
American Society of Mechanical Engineers (ASME) Student Section
Mechamorphis Club
Innovation Club
Drone Club
Faculty Achievements
Dr. S.H. Shariff:
from the Mechanical Engineering department has been selected for the AICTE Sponsored QIP-PG Programme on "Drone Technology" organized by IIITDM Kurnool! 🚁💻
Dr. Ramu Garugubilli
Selected for AICTE Sponsored QIP-PG Certificate Programme on "Internet of Things (IoT)", organized by Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Kurnool (July 2025 – December 2025).
Mr. V. Pradeep Kumar
Selected for AICTE Sponsored QIP-PG Certificate Programme on "Artificial Intelligence & Machine Learning", organized by Indian Institute of Information Technology (IIIT), Lucknow (July 2025 – December 2025) with 9.0 CGPA.
Dr. Ramu Garugubilli
Published an article titled "Effective Microwave Absorbing Polymer Nanocomposites in X-band: The Role of Graphene in Polyurethane/Polypropylene Multilayered Structures" in Vacuum (SCI Q1, Impact Factor: 3.9), 2025. DOI: 10.1016/j.vacuum.2025.114212.
Dr. Ramu Garugubilli
Published an article titled "Enhancement of heat transfer performance of water-based hybrid nanofluids in an alternate oval tube: a CFD approach" in Multiscale and Multidisciplinary Modeling, Experiments and Design (SCIE Q2, Impact Factor: 2.1), 2025. DOI: 10.1007/s41939-025-00962-5.
Dr. Ramu Garugubilli
Published an article titled "Experimental investigation on diesel engine operating with CuO nanoparticles dispersed Azadirachta indica biodiesel" in International Journal of Thermofluids (Scopus Q1), Vol. 22, 100641, 2024.
Dr. Sk. H. Shariff
Published an article titled "Experimental Study on Direct Injection Diesel Engine Fuelled with Ferric Chloride Nanoparticle Dispersed Cassia Fistula Biodiesel Blend" in IJEEE (International Journal of Energy and Environmental Engineering), June 2022.
Dr. Sk. H. Shariff
Published an article titled "Impact of Biodiesel on Engine Performance and Emission" in Materials Today: Proceedings, August 1, 2023.
Mr. L. Bhavani Shankar
Published an article titled "Modeling and Analysis of Rocket Nozzle Models by Using CATIA and ANSYS CFD" in IJAMTES (International Journal of Advanced in Management, Technology and Engineering Sciences), Volume XII, Issue V, May 2022.
Dr. Sk. H. Shariff
Published an article titled "Influence of FeCl₃ Nanoparticle Dispersion in Cassia Fistula Biodiesel Blend on the Analysis of Vibration and Noise Intensity of a Diesel Engine" in JVET (Journal of Vibration Engineering & Technologies), March 2022.
Mr. G. Ramu
Published an article titled "Modeling and Analysis of a Disc Brake Plate" in IRJMETS (International Research Journal of Modernization in Engineering Technology and Science), Volume 04, Issue 01, January 2022.
Ms. M. Lakshmi Sramika
Articles titled "Deployment of Feature Script in Collaboration with Cloud Computing", "Design and Analysis of Jet Propulsion Turbine", and "Design and Analysis of Rotor and Stator Blades of Compressor in Jet Engine" were indexed in the Scopus Database and published in IJMPERD, Vol. 10, Special Issue, August 2020.
Mr. G. Ramu
Article "Fabrication of Al-2014 Metal Matrix Nano Hybrid Composite and Evaluation of Its Properties" was indexed in the Scopus Database and published in IJMPERD, Vol. 10, Special Issue, June 2020.
Dr. Sk. H. Shariff
Article "Fabrication of Al-2014 Metal Matrix Nano Hybrid Composite and Evaluation of Its Properties" was indexed in the Scopus Database and published in IJMPERD, Vol. 10, Special Issue, June 2020.
Mrs. K. K. R. Parimala
Published an article titled "Design and Analysis of Ducted Fan Micro Aerial Vehicle" in IJIRSET (International Journal of Innovative Research in Science, Engineering and Technology), Volume 9, Issue 5, May 2020.
Ms. M. Lakshmi Sramika
Published an article titled "Design and Analysis of Ducted Fan Micro Aerial Vehicle" in IJIRSET (International Journal of Innovative Research in Science, Engineering and Technology), Volume 9, Issue 5, May 2020.
Ms. M. Lakshmi Sramika
Published an article titled "Study of the Effect of Silicon Oxide Nano Particles in the Copper Alloy" in International Symposium on Marine Design and Construction (SMDC 2019).
Mrs. K. K. R. Parimala
Published an article titled "Study of the Effect of Silicon Oxide Nano Particles in the Copper Alloy" in International Symposium on Marine Design and Construction (SMDC 2019).
Ms. M. Lakshmi Sramika
Published an article titled "An Experimental Study on Mechanical Behaviour of Pulsed Current Welding on Aluminum Alloy Joints" in AMR (Advanced Materials Research), Vol. 1148, June 2018.
Mr. G. Ramu
Published an article titled "An Experimental Study on Mechanical Behaviour of Pulsed Current Welding on Aluminum Alloy Joints" in AMR (Advanced Materials Research), Vol. 1148, June 2018.
Dr. A. M. Venkata Praveen
Published an article titled "Integrated approach to specimen design for accurate tensile and compressive testing using FEA and experiments" in Engineering Research Express (IOP Publishing Ltd), Eng. Res. Express 7 (2025) 025582. DOI: 10.1088/2631-8695/ade654.
Dr. A. M. Venkata Praveen
Published an article titled "Study of Consistency in Multi-response Optimization Generated with GRA using Sensitivity Analysis in Orthogonal Turn-mill and Lathe Processes under Eco-friendly Conditions" in AIP Conference Proceedings (Scopus), AIP Conf. Proc. 2794, 02002-(1-10), 2023. DOI: 10.1063/5.0166081. ISBN: 978-0-7354-4673-1.
Dr. A. M. Venkata Praveen
Published an article titled "Overview of Turn-Milling Machining Processes – A review" in AIP Conference Proceedings (Scopus), AIP Conf. Proc. 2943, 020011-1-020011-10 (2022). DOI: 10.1063/5.0182884. ISBN: 978-0-7354-4790-5.
Dr. A. M. Venkata Praveen
Published an article titled "Design & Fabrication of Isolation Robot Surveillance Delivery" in International Journal of Pharmacy with Medical Sciences (IJPAMS), ISSN: 3068-2738, Vol. 4, No. 1 (2024).
Dr. A. M. Venkata Praveen
Published an article titled "Power Generation from Waste Heat Using Thermoelectric Generator" in International Journal of Novalith Research and Innovation (IJNRI), ISSN: 2319-6771 (2023).
Dr. A. M. Venkata Praveen
Published an article titled "Simulation for Design of 3d Printed Omni Directional Robot" in International Journal of Data Science and IOT Management System (IJDIM), ISSN: 3068-272X (2022).
Dr. A. M. Venkata Praveen
Published an article titled "Experimental investigations of optimal 2D surface texture parameters using GRA when machining under dry and aerosol-mist conditions in Turn-mill operation" in International Journal of Mechanical and Production Engineering Research and Development (IJMPERD, Scopus), Vol. 10, Issue 3 (2020), pp. 173-182.
Dr. A. M. Venkata Praveen
Published an article titled "Evaluation of process parameters using GRA while machining low machinability material in dry and wet conditions" in Materials Today: Proceedings (Elsevier / Scopus), Vol. 5 (2018), pp. 25477–25485. DOI: 10.1016/j.matpr.2018.10.353.
Dr. A. M. Venkata Praveen
Published an article titled "Experimental study of surface roughness and cutting forces on stainless steel grade materials" in International Journal of Mechanical Engineering and Technology (IJMET, Scopus), Vol. 10, Issue 02 (2019), pp. 87-96.
Dr. A. M. Venkata Praveen
Published an article titled "Validation of HVAC system design using CFD modeling" in International Journal of Scientific Engineering & Technology Research (IJSETR), Vol. 05, Issue 49 (2016), pp. 10079-10083.
Dr. A. M. Venkata Praveen
Published an article titled "Numerical investigation of heat transfer characteristics of nano fluids in a circumferential for tube heat exchanger" in International Journal of Advance Engineering and Research Development (IJAERD, Scopus), Vol. 4, Issue 3 (2017).
Dr. A. M. Venkata Praveen
Published an article titled "Performance and emission evaluation of diesel engine for different volume concentration of cotton seed bio diesel" in International Journal and Magazine of Engineering Technology, Management and Research (IJMETMR), Vol. 5, Issue 11 (2018).
Dr. A. M. Venkata Praveen
Published an article titled "A Study Analysis and Performance of High-Pressure Boilers with its Accessories" in International Journal of Innovative Technologies (IJIT), ISSN: 2321-8665, Vol. 05, Issue 05 (2017), pp. 0921-0924.
Mr. V. Pradeep Kumar
Published an article titled "A Feasibility Report on the Comparison of the Characteristics of Manufacturing a Bearing Cover by the Processes of Sand Casting and Shell Moulding" in Advanced Materials Research, Vol. 1148, pp. 204-210, 2018. DOI: 10.4028/www.scientific.net/AMR.1148.204.
Mr. V. Pradeep Kumar
Published an article titled "An Experimental Study on Mechanical Behaviour of Pulsed Current Welding on Aluminum Alloy Joints" in Advanced Materials Research, Vol. 1148, pp. 193-203, 2018. DOI: 10.4028/www.scientific.net/AMR.1148.193.
Mr. V. Pradeep Kumar
Published an article titled "Wear Behavior of E-Glass Fiber Reinforced Epoxy Composites" in International Journal of Mechanical and Production Engineering Research and Development (IJMPERD, Scopus), Vol. 10, Special Issue, pp. 249-257, Aug 2020. ISSN: 2249-6890.
Mr. V. Pradeep Kumar
Published an article titled "Aero Dynamic Analysis on Audi Car Model Using CFD" in International Journal of Innovative Research in Technology (IJIRT), Vol. 11, Issue 12, p. 6116, May 2025. ISSN: 2349-6002.
Mr. V. Pradeep Kumar
Published an article titled "Characterization of Gas Turbine Blade with Different Materials through Frequency Response by Modal and Dynamic Analysis" in International Journal of Advanced Research, Ideas and Innovations in Technology (IJARIIE), Vol. 8, Issue 6, p. 18809, 2022. ISSN: 2395-4396.
Mr. V. Pradeep Kumar
Published an article titled "A Numerical Study on a Ceramic Heat Exchanger with Stacks of Different Cross Sections" in International Journal of Management, Technology And Engineering (IJMTE), Vol. 8, Issue XII, p. 1, Dec 2018. ISSN: 2249-7455.
Mr. V. Pradeep Kumar
Published an article titled "Aerodynamic Effect Caused by Ice Aircraft Wing" in International Journal of Advanced Technology and Innovative Research (IJATIR), Vol. 9, Issue 4, pp. 0547-0553, March 2017. ISSN: 2348-2370.
Mr. V. Pradeep Kumar
Published an article titled "Structural Design of Single Crank Shaft Using Analytical and FEM" in International Journal & Magazine of Engineering, Technology, Management and Research (IJMETMR), Vol. 3, Issue 12, p. 175, Dec 2016. ISSN: 2348-4845.
Mr. V. Pradeep Kumar
Published an article titled "Alternative Cooling and Mounting Concepts for Transition Duct in Industrial Gas Turbines" in International Journal of Mechanical Engineering and Computer Applications (IJMCA), Vol. 3, Issue 4, p. 81, Jul-Aug 2015. ISSN: 2320-6349.
Mr. V. Pradeep Kumar
Published an article titled "Solar Cooking: The Development of a Thermal Battery" in International Journal of Mechanical Engineering and Computer Applications (IJMCA), Vol. 3, Issue 4, p. 94, Jul-Aug 2015. ISSN: 2320-6349.
Mr. V. Pradeep Kumar
Published an article titled "Study and Analysis on Bio-Fuels" in International Journal & Magazine of Engineering, Technology, Management and Research (IJMETMR), Vol. 2, Issue 6, p. 210, June 2015. ISSN: 2348-4845.
Mr. V. Pradeep Kumar
Published an article titled "Solar-Thermal Hybridization of Advanced Zero Emissions Power Plants" in International Journal of Mechanical Engineering and Computer Applications (IJMCA), Vol. 3, Issue 5, p. 124, Sep-Oct 2015. ISSN: 2320-6349.
Mr. V. Pradeep Kumar
Published an article titled "Impacts of Distinctive Fuels on a Turbo Charged, Direct Injection, Spark Ignition Motor" in International Journal of Mechanical Engineering and Computer Applications (IJMCA), Vol. 3, Issue 4, p. 217, Jul-Aug 2015. ISSN: 2320-6349.
Mr. V. Pradeep Kumar
Published an article titled "Jet Noise Reduction Technology Development" in International Journal of Mechanical Engineering and Computer Applications (IJMCA), Vol. 3, Issue 4, p. 87, Jul-Aug 2015. ISSN: 2320-6349.
Mr. V. Pradeep Kumar
Published an article titled "Boiler Control Using Microcontroller" in International Journal of Mechanical Engineering and Computer Applications (IJMCA), Vol. 3, Issue 4, p. 132, Jul-Aug 2015. ISSN: 2320-6349.
Mr. V. Pradeep Kumar
Published an article titled "Boiler Burner and Fuel Firing System" in International Journal of Mechanical Engineering and Computer Applications (IJMCA), Vol. 3, Issue 5, p. 138, Sep-Oct 2015. ISSN: 2320-6349.
Mr. V. Pradeep Kumar
Published an article titled "Finest Machining Circumstances Revolving Al/SiC MMC Exploiting PSO Decay Assessment" in International Journal of Mechanical Engineering and Computer Applications (IJMCA), Vol. 3, Issue 5, p. 188, Sep-Oct 2015. ISSN: 2320-6349.
Mr. V. Pradeep Kumar
Published an article titled "Proposal Strategy of Centrifugal Pump Ideal Vanes" in International Journal of Mechanical Engineering and Computer Applications (IJMCA), Vol. 3, Issue 5, p. 178, Sep-Oct 2015. ISSN: 2320-6349.
Mr. V. Pradeep Kumar
Published an article titled "Two-Phase Flow Distribution with Down-Scaling" in International Journal & Magazine of Engineering, Technology, Management and Research (IJMETMR), Vol. 1, Issue 7, p. 15, July 2014. ISSN: 2348-4845.
Mr. V. Pradeep Kumar
Published an article titled "Stirling External Combustion Engine Solar Parabolic Collector" in International Journal & Magazine of Engineering, Technology, Management and Research (IJMETMR), Vol. 1, Issue 7, p. 8, July 2014. ISSN: 2348-4845.
Mr. V. Pradeep Kumar
Published an article titled "Forecast of Heat Transfer Using a Computational Fluid Dynamics Analysis (CFD)" in International Journal & Magazine of Engineering, Technology, Management and Research (IJMETMR), Vol. 1, Issue 7, p. 71, July 2014. ISSN: 2348-4845.
Mr. V. Pradeep Kumar
Published an article titled "Artificial Immune System Architecture to Maintain the Thermal Comfort" in International Journal & Magazine of Engineering, Technology, Management and Research (IJMETMR), Vol. 1, Issue 7, p. 52, July 2014. ISSN: 2348-4845.
Dr. Sk. H. Shariff
Presented a paper titled "Design of Automated Braking System of Vehicle Using PLC Ladder and Simulated with WPL Software" at the International Conference on Advances in Communications, Computing & Electronic Systems (ACCES-2022), held on 6–7 May 2022 at AIET, Vizianagaram, Andhra Pradesh, India.
Mr. G. Ramu
Presented a paper titled "Evaporation Characteristics Influence on Exhaust Emissions of Waste Plastic Oil Petro-Diesel Blends" at the International Conference on Advances in Communications, Computing & Electronic Systems (ACCES-2022), held on 6–7 May 2022 at AIET, Vizianagaram, Andhra Pradesh, India.
Dr. A. M. V. Praveen
Presented a paper titled "Study of Consistency in Multi Response Optimization Generated with GRA Using Sensitivity Analysis in Orthogonal Turn-Mill and Lathe Processes under Eco-Friendly Conditions" at the International Conference on Advances in Communications, Computing & Electronic Systems (ACCES-2022), held on 6–7 May 2022 at AIET, Vizianagaram, Andhra Pradesh, India.
Mr. K. Mohan Pradeep
Presented a paper titled "Evaporation Characteristics Influence on Exhaust Emissions of Waste Plastic Oil Petro-Diesel Blends" at the International Conference on Advances in Communications, Computing & Electronic Systems (ACCES-2022), held on 6–7 May 2022 at AIET, Vizianagaram, Andhra Pradesh, India.
Dr. Sk. H. Shariff
Participated in the One-Day Seminar on "Role of Internships and Industrial Projects in Engineering Education", organized by the Department of Mechanical Engineering, V.R. Siddhartha Engineering College, Vijayawada, on 11 November 2021.
Mrs. M. Raghava Rao
Participated with the paper "Influence of the Post-Weld Heat Treatment on the Microstructure, Mechanical Characteristics, and Corrosion Behaviour of AA6351 Gas Tungsten Arc Welds" at the 1st International Conference on Mechanical Engineering: Researches and Evolutionary Challenges – 2023, conducted by NIT Warangal, Telangana, from 23–25 June 2023.
Mrs. J. Jagadish
Participated with the paper "Study on Microstructure and Pitting Corrosion Behavior of Super Duplex Stainless Steel" at the 1st International Conference on Mechanical Engineering: Researches and Evolutionary Challenges – 2023, conducted by NIT Warangal, Telangana, from 23–25 June 2023.
Dr. Sk. H. Shariff
Patent published titled "Mechanism for Segmented Valve and Fuel Injection for Internal Combustion Engines". Application No.: 202341033849 A, Publication Date: 18 August 2023.
Dr. Ramu Garugubilli
Patent published titled "Method & Apparatus for improving vehicle suspension system using advanced kinematics & Dynamics". Application No.: 202541059710 (2025).
Dr. Ramu Garugubilli
Patent design registered titled "Design to Automatic Pesticide Spraying Robot". Application No.: 396719-001.
Dr. Ramu Garugubilli
Patent published titled "Conductive Bi-Layer Composition and Coating Method for Fuel Cells". Application No.: 202141000301 (2021).
Dr. Ramu Garugubilli
Patent published titled "Compressed and Recycled Air Engine". Application No.: 202141050485 (2021).
Dr. Ramu Garugubilli
Patent published titled "Alternative Biofuels with Enhanced Efficiency and Their Key Performance Indicators". Application No.: 202241023093 (2022).
Dr. A. M. Venkata Praveen
Patent published titled "Virtual Reality User Experience Classifier Employing Deep Learning for Design Enhancement". Application No.: 202641099385, Publication Date: 28/08/2026.
Dr. A. M. Venkata Praveen
Patent published titled "Enhancing Energy-Efficient and Total Thermal Management Heating and Cooling System for Electric Vehicles". Application No.: 202641040320, Publication Date: 10/04/2026.
Dr. A. M. Venkata Praveen
Patent published titled "Machine Learning-Based Method and System for Optimizing CNC Machining Parameters and Surface Finish". Application No.: 202541085237, Publication Date: 07/11/2025.
Dr. A. M. Venkata Praveen
Patent published titled "Ai-Powered Predictive Maintenance System for Industrial Machinery Using Vibration Analysis". Application No.: 202541092797, Publication Date: 24/10/2025.
Dr. A. M. Venkata Praveen
Patent published titled "Artificial Intelligence Operated and Coupled with a Six Pair of Legged Spider Robot". Application No.: 202541059497, Publication Date: 04/07/2025.
Dr. A. M. Venkata Praveen
Patent published titled "An Advanced Dual Power Generation Solar Plus Windmills Generator". Application No.: 202541032666, Publication Date: 02/05/2025.
Dr. A. M. Venkata Praveen
Patent published titled "Waste to Energy Systems Turning Municipal Waste into Renewable Energy". Application No.: 202541007287, Publication Date: 07/02/2025.
Dr. A. M. Venkata Praveen
Patent published titled "IOT Based Hydraulic Jack Lifter". Application No.: 202441093676, Publication Date: 06/12/2024.
Mr. V. Pradeep Kumar
Patent published titled "Composite Layered Protective Coat for Solid Oxide Fuel Cell Applications". Application No.: 201941030534, Publication Date: 09/08/2019.
Dr. Sk. H. Shariff
Published the textbook "Materials Science and Nano Technology" (First Edition), ISBN: 978-93-5757-319-1, Year of ISBN Allotment: 2022, published by International SIPH Scientific.
Dr. Ramu Garugubilli (Dr. G. Ramu)
Published the textbook "Manufacturing Process" (First Edition), ISBN: 978-93-5757-215-6, Year of ISBN Allotment: 2022, published by International SIPH Scientific.
Dr. Ramu Garugubilli (Dr. G. Ramu)
Authored the textbook "Engineering Graphics" (Under Process).
Dr. A. M. Venkata Praveen
Published the textbook "Fundamentals of 3D Printing" (First Edition), ISBN: 978-93-5757-503-4, Year of ISBN Allotment: 2022, published by Scientific International Publishing House.
Dr. A. M. Venkata Praveen
Published the textbook "Smart and Sustainable Mechanical Engineering", ISBN: 978-93-6348-493-1, Year of ISBN Allotment: 2025, published by Leilani Katie Publication and Press.
Dr. A. M. Venkata Praveen
Published the textbook "Advanced Manufacturing Processes and Automation", ISBN: 978-93-6348-631-7, Year of ISBN Allotment: 2025, published by Leilani Katie Publication and Press.
Dr. A. M. Venkata Praveen
Published the textbook "Advanced Thermodynamics and Energy Systems", ISBN: 978-93-6348-369-9, Year of ISBN Allotment: 2025, published by Leilani Katie Publication and Press.
Mr. V. Pradeep Kumar
Published the textbook "Advanced Manufacturing Processes and Automation", ISBN: 978-93-6348-631-7, Year of ISBN Allotment: 2025, published by Leilani Katie Publication & Press.
Mr. V. Pradeep Kumar
Published the textbook "Advanced Thermodynamics and Energy Systems", ISBN: 978-93-6348-369-9, Year of ISBN Allotment: 2025, published by Leilani Katie Publication & Press.
Mr. V. Pradeep Kumar
Published the textbook "Smart and Sustainable Mechanical Engineering", ISBN: 978-93-6348-493-1, Year of ISBN Allotment: 2025, published by Leilani Katie Publication & Press.
Mrs. M. Lakshmi Sramika
Participated in the Three-Day Online Faculty Development Program on "MATLAB for Mechanical Engineering" conducted by the Department of Mechanical Engineering, Raghu Engineering College (Autonomous), from 10–12 July 2023.
Dr. Sk. H. Shariff
Participated in the Five-Day Online Faculty Development Program on "Future Scopes for Additive Manufacturing in Industrial and Biomedical Applications", organized by Aditya Engineering College (Autonomous), from 17–21 July 2023.
Dr. S. Hidayatulla Shariff
Attended an online guest lecture on "Introduction to Intellectual Property and Patent Filing Procedure", organized by CK College of Engineering & Technology on 28 July 2023.
Mrs. K. K. R. Parimala
Participated in the Three-Day Online Faculty Development Program on "MATLAB" conducted by Raghu Engineering College (Autonomous), from 10–12 July 2023.
Mrs. K. Deepthi
Participated in the Three-Day Online Faculty Development Program on "MATLAB" conducted by Raghu Engineering College (Autonomous), from 10–12 July 2023.
Mr. Ramu Garugubilli
Participated in the Three-Day Online Faculty Development Program titled "MATLAB for Mechanical Engineering" conducted by Raghu Engineering College (Autonomous), from 10–12 July 2023.
Mr. V. Pradeep Kumar
Participated in the Three-Day Online Faculty Development Program on "MATLAB" conducted by Raghu Engineering College (Autonomous), from 10–12 July 2023.
Mr. Ramu Garugubilli
Participated in the One-Week Online Faculty Development Program on "Integrating Autodesk Fusion 360 in Engineering Subjects", held from 26 June – 1 July 2023, organized by Lendi Institute of Engineering & Technology in association with Autodesk.
Dr. A. M. Venkata Praveen
Participated in the Three-Day Online Faculty Development Program titled "MATLAB for Mechanical Engineering" conducted by Raghu Engineering College (Autonomous), from 10–12 July 2023.
Mr. G. Ramu
Attended the Short-Term Training Program on "Recent Trends in Additive Manufacturing Technologies (RTAM-2023)" conducted by NCAM from 28 July – 1 August 2023.
Mr. G. Ramu
Received the Best Teacher Award at Avanthi Institute of Engineering and Technology, Cherukupally during the academic year 2021–2022.
Ms. M. Lakshmi Sramika
Received the Best Teacher Award at Avanthi Institute of Engineering and Technology, Cherukupally during the academic year 2019–2020.
Mr. V. Pradeep Kumar
Received the Best Teacher Award at Avanthi Institute of Engineering and Technology, Cherukupally during the academic year 2019–2020.
Dr. Ramu Garugubilli
Successfully earned the NPTEL Domain Certification in Data Science from IIT Madras. This achievement recognizes his dedication to continuous learning and excellence in academics and research.
Dr. Avinash Ben HOD
Attended a Two-Day Workshop titled "Renewable Energy Utilization for Sustainable Growth (REUSG-2023)" conducted at Indian Institute of Petroleum and Energy (IIPE), Visakhapatnam, in August 2023.
Dr. Sk. H. Shariff
Attended a Two-Day Workshop titled "Renewable Energy Utilization for Sustainable Growth (REUSG-2023)" conducted at Indian Institute of Petroleum and Energy (IIPE), Visakhapatnam, in August 2023.
Student Achievements
SOLID 3D PRINTER
3D Printer is used to convert the 3D design that a person creates using a computer into a real object.
SEED SOWING AGRICULTURE ROBOT
A smart agriculture robot capable of performing seed sowing operations with high accuracy, reducing manual effort in farming.
EAT-E BIKE
Cost-effective electric motorcycle integrated with an intelligent control system.
LEAD SCREW FORKLIFT
A user-friendly forklift useful in small-scale industries and helps reduce overall operating cost.
SOLAR GRASS CUTTER
Compact and portable grass cutter powered by solar energy with eco-friendly operation.
HYBRID TWO WHEELER
A hybrid two-wheeler that operates using both fuel and electric power.
INVERTED UMBRELLA
Smart rainwater harvesting system integrated with solar-powered street lighting.
Internships & Industrial Visits
Bridging the Gap Between Classroom & Industry!
The Department of Mechanical Engineering, Avanthi Institute of Engineering and Technology, organized an industrial visit to Hindustan Shipyard Limited (HSL), Visakhapatnam, for all III B.Tech Mechanical Engineering students on 26th September 2026.
Students gained valuable exposure to:
- ⚙️ Shipbuilding & ship repair
- 🏭 Heavy engineering operations
- 🛠️ Manufacturing processes
- 📚 Real-world industrial practices
✨ A meaningful experience that transformed theoretical learning into practical understanding!
Academic Toppers
| Roll No: | 19Q75A0332 |
| Name: | KASIMKOTA UPENDRA |
| CGPA: | 8.23 |
| Year: | 2018 - 2022 |
| Roll No: | 19Q75A0355 |
| Name: | B BISWAJITH |
| CGPA: | 8.21 |
| Year: | 2018 - 2022 |
| Roll No: | 18Q75A0346 |
| Name: | ILLAPU SHANMUKHA |
| CGPA: | 8.58 |
| Year: | 2017 - 2021 |
| Roll No: | 17Q71A0350 |
| Name: | SAMBANGI TIRUPATHI RAO |
| CGPA: | 7.95 |
| Year: | 2017 - 2021 |
| Roll No: | 17Q75A0360 |
| Name: | RAMACHANDRA AKHIL SAI |
| CGPA: | 8.87 |
| Year: | 2016 - 2020 |
| Roll No: | 17Q75A0301 |
| Name: | AHAMADUNISHA SYED |
| CGPA: | 8.09 |
| Year: | 2016 - 2020 |
| Roll No: | 20Q75A0392 |
| Name: | N UMA MAHESWARA RAO |
| CGPA: | 8.20 |
| Year: | 2019 - 2023 |
| Roll No: | 20Q75A0333 |
| Name: | M NITHIN |
| CGPA: | 7.80 |
| Year: | 2019 - 2023 |
| Roll No: | 24Q71A0315 |
| Name: | KINJARAPU CHINNARAO |
| CGPA: | 9.06 |
| Year: | 2024 - 2025 |
| Roll No: | 24Q75A0315 |
| Name: | N. LOKANATH |
| CGPA: | 8.7 |
| Year: | 2024 - 2025 |
| Roll No: | 24Q71A0315 |
| Name: | KINJARAPU CHINNARAO |
| CGPA: | 9.53 |
| Year: | 2024 - 2025 |
| Roll No: | 24Q71A0346 |
| Name: | THOTTADI GANESH |
| CGPA: | 8.64 |
| Year: | 2024 - 2025 |
| Roll No: | 24Q71A0305 |
| Name: | BONI NARESH |
| CGPA: | 8.61 |
| Year: | 2024 - 2025 |
| Roll No: | 24Q75A0305 |
| Name: | G. VASANTH KUMAR |
| CGPA: | 8.8 |
| Year: | 2019 - 2023 |
Internships & Industrial Visits
Hydrogen Energy Systems for a Clean and Green Future.
We are delighted to share that the Department of Mechanical Engineering at Avanthi Institute of Engineering and Technology, Vizianagaram, has received approval to host the ATAL Online 1-Week Faculty Development Programme (FDP) for the academic year 2025-26, sanctioned by the AICTE Training and Learning Academy (ATAL). 📘 Title of ATAL FDP: Hydrogen Energy Systems for a Clean and Green Future. Congratulations to: Dr.B.Murali Krishna, Coordinator (Professor & Principal, Dept of Mech) Dr. S.H.Shariff, Co-coordinator (Assoc. Prof. & ASD-R&D Dept. of Mech). This is a great recognition of our commitment to academic excellence and cutting-edge research in emerging technologies like Hydrogen Energy.
Alumni Speak
Kesavarao Podipireddi
Roll No: 16Q71A0390| Roll No | 16Q71A0390 |
| Name | Kesavarao Podipireddi |
| Company | Tata Consultancy Services |
| Package | 3.36 LPA |
I Shanmukha
Roll No: 18Q75A0346| Roll No | 18Q75A0346 |
| Name | I Shanmukha |
| Company | Infosys |
Department Gallery
